The Skin Armor is a transparent flexible polyurethane protective film specifically developed for frames and components with a glossy finish. It protects your bike from scratches and rubbing. The Glue Shield technology requires no liquids, so it's quick and easy to apply. Pre-cut kits are available in a range of sizes to cover the most exposed areas of your bike (cable routing, down tube, horizontal tube or cranks). The Skin Armor is resistant to water (high-pressure washing), tearing, perforation, peeling, UV rays and temperature variations. It's the ideal solution for cyclists looking for an effective, discreet solution to preserve their bike's appearance and resale value.

Features

• High resistance: No rips. Excellent resistance to puncture and peeling.
• UV resist: Does not change colour with time.
• Washable: Resistant to high-pressure water jets.
• Temperature fluctuations resist: From -30°C to +100°C / From -22°F to +212°F.
• Glue shield technology: Quick and easy dry fitting. High adhesive strength.

Specifications

• Material: Polyurethane
• Colors: Clear
• Thickness: 250 microns
• Product reference: S (ref. 2603) / M (ref. 2600) / L (ref. 2601) / XL (ref. 2618)
• Finish: Shiny
• For: Gloss finish frame and parts
• Dimensions Skin Armor S: 290 x 74 x 2 mm
• Dimensions Skin Armor M: 395 x 139 x 3 mm
• Dimensions Skin Armor L: 548 x 135 x 3 mm
• Dimensions Skin Armor XL: 548 x 174 x 3 mm
• Included in Skin Armor S: 1 chainstay protection 252 x 25 mm 4 patches 35 X 25 mm 2 patches 25 x 45 mm
• Included in Skin Armor M: 1 down-tube protection 345 X 58 mm 1 rear base-protection 252 X 25 mm 4 patches 35 X 25 mm 4 patches 50 X 25 mm 2 patches Ø 25 mm
• Included in Skin Armor L: 1 down-tube protection 500 X 58 mm 1 top-tube protection 500 X 58 mm 2 rear base-protection 252 X 25 mm 2 crank protection 105 X 25mm 4 patches 35 X 25 mm 4 patches Ø 25 mm
• Included in Skin Armor XL: 2 down-tube protection 500 X 90 mm 1 top-tube protection 500 X 58 mm 2 seat stay protection 244 X 35 mm 1 rear base-protection 252 X 25 mm 3 patches 50 X 25 mm 2 patches 35 x 25 mm

Additional Information

• Mounting instructions
  1. Wash your hands.
  2. Apply on a clean bike.
  3. Degrease the surface to be protected with a fast-evaporating solution (such as isopropyl alcohol), and dry with a clean cloth.
  4. Separate the Skin Armor from its protection so that only the transparent adhesive remains.
  5. Locate the spot and apply the patch. The protection remains repositionable.
  6. If the position suits you, rub the patch with a soft cloth to remove air and ensure perfect adhesion to the substrate.
  7. Dispose of the non-adhesive protection in the selective waste bin for better recycling.
• Directions for use
  • The Skin Armor protection can be removed cold or with heat (hairdryer).
  • Remove gently and gradually. If glue residue remains, clean with alcohol.
  • Dispose of the used protection in the selective waste bin. This product can be recycled.
• Engineered: Product designed by our R and D department in France.
• Quality commitment: The commitment to quality is one of our major concerns. If you encounter any difficulties with this product, please contact our quality department.